pitman arm?
02-25-2011, 12:34 PM
#1
Senior Member
Thread Starter
Join Date: Dec 2010
Location: Linthicum, Md
Posts: 903
Likes: 0
Received 1 Like
on
1 Post
Year: 1987
Model: Cherokee
Engine: 1987 4.0L (242 CID) I6 RENIX FI 242 173 hp (129 kW) @ 4600 rpm, 224 lb•ft (304 N-m) @ 4000RPM
pitman arm?
I currently have a 2" budget lift on my Jeep XJ.
I've got the whole set up, All from rough country; new front and rear RC8000 shocks, front coil spacers, rear shackles, aal's, RC steering stabilizer.
would adding a 1" drop pitman arm do anything for me?
I am planning on, in about a year or so, to upgrade it to a 4.5" lift; could i use a drop pitman that is meant for 3'-5"? so i wouldnt have to buy another one in a year?
Thanx
I've got the whole set up, All from rough country; new front and rear RC8000 shocks, front coil spacers, rear shackles, aal's, RC steering stabilizer.
would adding a 1" drop pitman arm do anything for me?
I am planning on, in about a year or so, to upgrade it to a 4.5" lift; could i use a drop pitman that is meant for 3'-5"? so i wouldnt have to buy another one in a year?
Thanx
Last edited by DocOrng XJ; 02-25-2011 at 12:36 PM.
02-25-2011, 01:32 PM
#3
Senior Member
Join Date: Nov 2009
Location: Rhode Island
Posts: 876
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1994
Model: Cherokee
Engine: 4.0
you don't need one at all until you ge to 4.5-6.5+ but hey it can't hurt right... your 2" will be fine unless you go over 6.5 i'd say
02-25-2011, 02:02 PM
#5
Senior Member
Thread Starter
Join Date: Dec 2010
Location: Linthicum, Md
Posts: 903
Likes: 0
Received 1 Like
on
1 Post
Year: 1987
Model: Cherokee
Engine: 1987 4.0L (242 CID) I6 RENIX FI 242 173 hp (129 kW) @ 4600 rpm, 224 lb•ft (304 N-m) @ 4000RPM
Thanks for the replys
I will wait til next year's 4.5 lift upgrade.
I will wait til next year's 4.5 lift upgrade.
Thread
Thread Starter
Forum
Replies
Last Post
cpnwrench
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
13
02-15-2024 08:09 AM
studmuffin
Cherokee Chat
8
10-05-2015 01:54 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)