Painting fenders after trimming
#1
Senior Member
Thread Starter
Join Date: Dec 2010
Location: Michigan (Home state) Stationed in Montana
Posts: 882
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1993
Model: Grand Cherokee
Engine: 5.2L MPI V8 (318)
Painting fenders after trimming
I'm planning on doing some light trimming to my 94 Cherokee Country tomorrow, and I then want to paint over the metal I expose or seal it somehow to prevent the paint from chipping, peeling, and rusting etc. After I'm done trimming, what should I use to coat over the fresh cut to seal the paint back up?
Thanks!
Thanks!
Last edited by CherokeeCountry; 06-12-2011 at 07:54 PM.
#4
CF Veteran
Join Date: Feb 2011
Location: southern indiana
Posts: 1,707
Likes: 0
Received 0 Likes
on
0 Posts
Year: 92
Model: Cherokee
Engine: 4.0
I used black rtv sealant after I cut n tucked my back ones and the front I just sanded primed and painted . Pretty much anything to seal it would work
#5
Senior Member
Join Date: Dec 2010
Location: Peterborough, Ontario, Canada
Posts: 588
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0L
As said above, you can pretty much coat it with anything.. but I used a spray can of Rocker Guard on mine and so far it's doing well (done about 5 months ago).
*The paint looks kinda chipped on the edges in the pic but it must be the flash..
*The paint looks kinda chipped on the edges in the pic but it must be the flash..
Thread
Thread Starter
Forum
Replies
Last Post
Stabsthedrama
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
15
10-03-2015 05:46 PM
xjcarolina
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
5
09-29-2015 08:43 PM
Sivadon
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
1
09-24-2015 07:31 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)