Need new ball joints
#1
Newbie
Thread Starter
Join Date: May 2018
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee (XJ)
Need new ball joints
Hey guys, I’m a little new to upgrading my Jeep but I am trying to pick things up as I go! I just figured out after installing a 4.5 inch lift kit on my 1996 Jeep Cherokee that I get extreme death wobble at about 45 miles an hour... So I did what anybody else would do and got to crawling around under my Jeep and sure enough I got some shot ball joints under there. I have been looking around but I can’t really find any at a good price. Any suggestions and if you have done this maybe some tips? Thank you!
#2
Member
Join Date: Apr 2018
Location: Northern Canada
Posts: 201
Likes: 0
Received 1 Like
on
1 Post
Model: Cherokee(XJ)
Engine: 4.0 Renix
What's a good price? The actual OEM Dana ones are like $60 a side (comes as a kit of the upper and lower) on Rockauto. Mevotech HD ones are a little less per side (come individual).
If that's too much, sell your Jeep now.
If that's too much, sell your Jeep now.
#3
Newbie
Thread Starter
Join Date: May 2018
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee (XJ)
That’s a good price, I was looking and found a couple like 80 bucks a pair and stuff. I was just looking to see if anyone knew of any cheaper ones! This Jeep is a build in process to be a badass rig so I ain’t never selling it gonna keep it till I literally can’t get it to start and run lol
#5
Senior Member
Join Date: Feb 2018
Location: Kentucky
Posts: 534
Likes: 0
Received 1 Like
on
1 Post
Year: 1999
Model: Cherokee(XJ)
Engine: 4.0L I-6
X2 on the Spicers ! Check eBay! I have seen both sides as low as $96 shipped !!! I have plenty of time. I sit around and cross-reference part numbers. Then you can figure out which vehicles use the same BJ. Then I do a search for Spicer BJs for each vehicle till I find the best price. Saves me a bunch of money ! Just last week, I got the long ZJ tie rod for $24 shipped. I also got one of the other Spicer tie rods for $11.95 shipped !!!
Last edited by CRLAMBERTJR; 05-26-2018 at 09:14 PM. Reason: Error
#6
Member
Join Date: Apr 2018
Location: Northern Canada
Posts: 201
Likes: 0
Received 1 Like
on
1 Post
Model: Cherokee(XJ)
Engine: 4.0 Renix
(I also converted the currency of them in my head, so YMMV as I have Rockauto in CND and won't change it)
#7
Junior Member
Join Date: May 2015
Location: Blacksburg, VA
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
Hey guys, I’m a little new to upgrading my Jeep but I am trying to pick things up as I go! I just figured out after installing a 4.5 inch lift kit on my 1996 Jeep Cherokee that I get extreme death wobble at about 45 miles an hour... So I did what anybody else would do and got to crawling around under my Jeep and sure enough I got some shot ball joints under there. I have been looking around but I can’t really find any at a good price. Any suggestions and if you have done this maybe some tips? Thank you!
Depends what a good price is. MOOG and a few other brands at Auto Zone or Advance I believe come with Lifetime Warranties, so that's good. I run Alloy USA joints which were most expensive but have held up great.
Spicers are also solid.
Thread
Thread Starter
Forum
Replies
Last Post
scbrooks87
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
15
10-30-2018 10:50 AM
FS[PacSouthWest]: upper/lower ball joints and u joints
studmuffin
Suspension/Steering
11
04-25-2013 10:22 PM
K5ADT
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
02-12-2013 11:19 AM
Jim G
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
7
03-21-2011 07:37 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)