muffle guard?
#1
Senior Member
Thread Starter
Join Date: Oct 2009
Location: Southern Utah
Posts: 532
Likes: 0
Received 1 Like
on
1 Post
Year: 1992
Model: Cherokee
Engine: 4.0 I6
muffle guard?
So I beat the hell out of my muffler last time I went wheelin. I've looked for a skid plate for a while, no such luck. Anyone have the same problem or a fix/fabbed up something?
#2
Senior Member
Join Date: May 2010
Location: Here, There, Everywhere
Posts: 745
Likes: 0
Received 1 Like
on
1 Post
Year: 1997
Model: Grand Cherokee
Engine: 5.2
Take it slow and get a bigger lift. Just kidding, well not really those will help but I guess u can make a skid, have it come off the unibody rail.1 Or a full belly skid????
#4
Senior Member
Thread Starter
Join Date: Oct 2009
Location: Southern Utah
Posts: 532
Likes: 0
Received 1 Like
on
1 Post
Year: 1992
Model: Cherokee
Engine: 4.0 I6
Originally Posted by krawlthis
Take it slow and get a bigger lift. Just kidding, well not really those will help but I guess u can make a skid, have it come off the unibody rail.1 Or a full belly skid????
#6
CF Veteran
I gave up on the idea of a skid plate for the muffler and just replaced it with the cherry bomb. They fit up inside the rails better so they're unlikely to get hit and if they do, they're strong and rounded so they wont get hung up on anything.
#7
CF Veteran
I've smashed quite a few mufflers and wrapped tailpipes around the axle. Now I just don't even bother with a tailpipe, makes it easier to replace the muffler if it gets smashed. I've always wondered if there was a muffler skid lol.
Trending Topics
#9
Member
x2. thats what I did. I like the idea of losing the tailpipe section too! it was a PITA.
#10
CF Veteran
So for me I just continued the tail section and hung it up higher above/beside the leaf spring so I'd have to basically screw up my suspension and gas tank in order to hit my tailpipe again.
#11
CF Veteran
It's got scrapes all over even a couple dents but never busted it.
They are great! Never get caught on anything.
#12
Senior Member
Thread Starter
Join Date: Oct 2009
Location: Southern Utah
Posts: 532
Likes: 0
Received 1 Like
on
1 Post
Year: 1992
Model: Cherokee
Engine: 4.0 I6
https://www.cherokeeforum.com/f46/bl...5-build-71449/
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)