Metal sleeves in Bar pin eliminators
03-05-2011, 01:30 PM
#1
Senior Member
Thread Starter
Join Date: May 2010
Location: Johnson County, Kansas
Posts: 701
Likes: 0
Received 1 Like
on
1 Post
Year: 1995
Model: Cherokee
Engine: 4.0 HO
Metal sleeves in Bar pin eliminators
When using the rear swaybar mount for a Bar pin eliminator is it a good idea to put a metal sleeve in your shock bushing after removing the barpin? I noticed the rear lower shock just has a rubber bushing with no metal insert. Also when I removed the barpin there was no metal sleeve in the bushing.
03-05-2011, 01:38 PM
#2
Senior Member
Join Date: Jan 2011
Location: Los Fresnos, Texas
Posts: 707
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2k
Model: Cherokee
Engine: 4.0
You don't really need one if the bolt that secures it is snug in the bushing. If that's not the case then you can either drill the holes in the mount to fit a larger bolt or get a sleeve that steps down to the bolt size.
Thread
Thread Starter
Forum
Replies
Last Post
moish
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
8
09-19-2015 11:55 AM
mtoskippy
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
6
09-13-2015 12:08 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)