Front passenger upper control arm bushing
09-12-2015, 10:55 AM
#1
Junior Member
Thread Starter
Join Date: May 2015
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
Model: Grand Cherokee
Engine: 5.2l
Front passenger upper control arm bushing
This bushing as it sits now moves side to side, metal sleeve and all in the riser coming off the axle. I have a new one to press in. Just wondering if that bushing moves or should be solid metal to metal.
Thanks
Thanks
09-12-2015, 05:33 PM
#4
Junior Member
Thread Starter
Join Date: May 2015
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
Model: Grand Cherokee
Engine: 5.2l
Front passenger upper control arm bushing
Jeeeez never mind. It was supposed to be a video.
Bustedback. Thanks. Always a wealth of knowledge.
Bustedback. Thanks. Always a wealth of knowledge.
09-12-2015, 11:08 PM
#6
CF Veteran
Join Date: Feb 2010
Location: Oroville, CA
Posts: 12,367
Likes: 0
Received 19 Likes
on
18 Posts
Year: 1995
Model: Grand Cherokee
Engine: 4.0 with all of the noise and clatter
I bought some cheap eBay control arms once and the bushing in one of the arms popped loose within a week. Spend a little more for good quality. It will save you money in the long run.
09-13-2015, 12:08 AM
#7
Junior Member
Thread Starter
Join Date: May 2015
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
Model: Grand Cherokee
Engine: 5.2l
Front passenger upper control arm bushing
I bought some dorman arms with the body bushings. And moog axle bushings. Needed to fix it so I could drive it. I'll keep an eye on them and upgrade them to rusty's if or when they go bad or if money comes in for them first. 
Thread
Thread Starter
Forum
Replies
Last Post
Rotorhead
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
20
09-23-2023 04:17 PM
ammonllewis1
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
9
08-31-2015 11:27 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)