Master Cylinder Interchange
Thread Starter
Newbie
Joined: Dec 2016
Posts: 23
Likes: 0
From: NW Montana
Year: 2001
Model: Cherokee
Engine: 4.0L
Master Cylinder Interchange
Can anyone tell me what the Master Cylinder interchange would be for a 2001 XJ, ie what application should I look for.
I still do not have good pedal after rear drum:disc brake conversion even with Wilwood proportioning valve.
I still do not have good pedal after rear drum:disc brake conversion even with Wilwood proportioning valve.
CF Veteran
Joined: Dec 2015
Posts: 3,038
Likes: 338
From: PA
Year: 1997
Model: Cherokee
Engine: 4.0L
I cant help with the swap itself, but that rod must be adjusted just right or the brakes will not work (rod is too short), or the brakes will lock up (rod is too long). What that proper length is for your particular application is i have no clue, or if thats even the problem to begin with, but that may be where Cruiser was headed with that pic. ???
::CF Moderator::
Joined: Aug 2011
Posts: 43,971
Likes: 1,579
From: Prescott, Az
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0
I cant help with the swap itself, but that rod must be adjusted just right or the brakes will not work (rod is too short), or the brakes will lock up (rod is too long). What that proper length is for your particular application is i have no clue, or if thats even the problem to begin with, but that may be where Cruiser was headed with that pic. ???
Thread
Thread Starter
Forum
Replies
Last Post
lastclodstanding
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
14
Oct 21, 2018 03:28 PM
mkawski
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
Oct 28, 2016 02:27 PM
wrongisland
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
Aug 16, 2008 07:14 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
