Love this alt. beef mod!!!!!!!!
CF Veteran
Joined: Nov 2010
Posts: 15,581
Likes: 8
From: some small town oregon
Year: 1989
Model: Cherokee
Engine: 4.0
Originally Posted by duffman5001
I can't tell if you are talking to me or someone else- I spent way more then 30 seconds searching this mod- that is why I bought a 7913, and now figured out it won't work... Now I need to go to plan B. So the discussion now is not the zj swap, but figuring out the best option for upgrading the renix to a higher amperage unit.
pieced together on my iPhone using all the extra parts from my cherokee...
Seasoned Member
Joined: May 2010
Posts: 361
Likes: 0
From: NW Montana
Year: 88
Model: Cherokee
Engine: 4.0
Ok to run a zj alt in a renix you have to find an aftermarket regulator and wire it in. It's a pain. You can also have your stock alt respun up to 180 amp. You just need to find an alt and starter rebuilder that can do it for you. It cost me $50 to boost my old one to 160 amp.
pieced together on my iPhone using all the extra parts from my cherokee...
pieced together on my iPhone using all the extra parts from my cherokee...
Seasoned Member
Joined: May 2010
Posts: 361
Likes: 0
From: NW Montana
Year: 88
Model: Cherokee
Engine: 4.0
Ok to run a zj alt in a renix you have to find an aftermarket regulator and wire it in. It's a pain. You can also have your stock alt respun up to 180 amp. You just need to find an alt and starter rebuilder that can do it for you. It cost me $50 to boost my old one to 160 amp.
pieced together on my iPhone using all the extra parts from my cherokee...
pieced together on my iPhone using all the extra parts from my cherokee...
Its the same alternator as the ZJ. I just put one on a few weeks ago and it was a pain but it went in flawlessly.
To take advantage of the amps you will have to upgrade your wiring to larger wires. The way it sits it will work fine but to get the most out of it the wiring is undersized.
To take advantage of the amps you will have to upgrade your wiring to larger wires. The way it sits it will work fine but to get the most out of it the wiring is undersized.
Thread Starter
CF Veteran
Joined: Jan 2010
Posts: 1,506
Likes: 2
From: WI
Year: '99
Model: Cherokee
Engine: 4.o
That's why I didn't use a ZJ one. And as for a renix I would just do a HO swap and call it good. Just hate that older set up and it's crazy wires all over. Pulse the shop buy me who builds alts will not give out a warente on a built up one.
Thread
Thread Starter
Forum
Replies
Last Post
TNXJsleeper
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
Oct 2, 2015 08:04 PM
nicksan
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
5
Oct 1, 2015 11:04 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



