I bought my cherokee with what looks to be a 4" cheap-o skyjacker lift kit on it. My brother in law has a cool control arm drop kit that is about $200 bucks. I am thinking why not spend a little more and get a long arm upgrade kit...
http://www.roughcountry.com/jeep_xj_689U.html
The kit says that it will work for a 4" or 6" lift. Is there anything else for the front end that I would need to use this and in the future, if I wanted to go up to 6" would I just get new coils and shocks?

I am aware I would need a sye and new leafs would have to be done in the rear and I think I may do a hack and tap now anyways, just wondering about the front end.
Thanks in advance for any help

 

Did I post in the wrong place or something? I thought this would be an easy one for you guys...

 

Yes, it should be in Advanced Tech.

I will move it.

You will need to address steering geometry. Probably brake lines. And track bar. New, longer travel shocks. Maybe limiting straps.

 

Thanks for moving in proper place. I figured track bar, shocks and brake lines. Didn't think about steering geometry though. What needs to be done with that?

 

Make sure your tie rod and track bar stay in line. You may be OK, but a drop pitman arm or OTK setup may ne needed.