Alright guys looken at installing my 3inch lift but before I doo is there anythang I'll need othere than my spacers and shackles
Do I need sway bar drop or anythang cause the web site did mention anythang about that or anythang just won't to double check first lift I've every done guy so apperciate any tips and what not

 

did you get a track bar? you might wanna get Brake extenstions also

 

Relocating the bracket to a new hole should take care of the lines for a 3" lift.

 

All I got with the lift was 3inch spacers and a 2inch rear shackle brake lines I got them covered
Im kinda concerned about the sway bar and control arms or should they work fine with the lift

 

You can get away with stock control arms at 3", not so much with the swapbar end links. Might be able to get them to fit but i usually see them break due to the angle. Might want to look into redilling the axle side mount for the trackbar, You can get away with it as is but it rides much better with the front axle centered. No bump steer or death wobble