lift question
Thread Starter
Member
Joined: Jun 2010
Posts: 123
Likes: 0
From: West Middlesex, PA
Year: 01
Model: Cherokee
Engine: Stock 4.0
So I'm getting a big check because some kid hit my jeep and totalled it. Looking at these lifts for the new jeep and was wondering about the adjustable x flex control arms.
http://www.roughcountry.com/jeep_xj_4x.html
Or should I get the cheaper one without them and with the new leaf springs?
http://www.roughcountry.com/jeep_xj_4.html
Thanks
http://www.roughcountry.com/jeep_xj_4x.html
Or should I get the cheaper one without them and with the new leaf springs?
http://www.roughcountry.com/jeep_xj_4.html
Thanks
"CF Moderator"
Joined: Sep 2008
Posts: 3,045
Likes: 3
From: N.J. Shore Area
Year: 1994
Model: Cherokee
Engine: l6 HO
Hi. I would go with the better one (First one) because sooner or later your gonna want to lift it higher and your gonna need the adjustable control arms to get your alignment done. Plus full leafs are always better than AAL's talking from experience... Just my 2cents...Tj
Last edited by TrekkerJmm; Mar 31, 2011 at 06:44 AM.
"CF Moderator"
Joined: Sep 2008
Posts: 3,045
Likes: 3
From: N.J. Shore Area
Year: 1994
Model: Cherokee
Engine: l6 HO
I bought the Zone 3 inch cause money was tight and eventually went for the full leafs from Grimus/RC and also the front coils from him and it rides 100% better...Tj
Member
Joined: May 2010
Posts: 223
Likes: 0
From: South Carolina
Year: 1996
Model: Cherokee
Engine: 4.0 HO
Originally Posted by FatBob
If money permits, always go with the better/more inclusive kit. You'll like the ride and adjustability better and you'll have less to upgrade later.
Sent from my iPad using CherokeeFM
Trending Topics
CF Veteran
Joined: Jan 2011
Posts: 2,251
Likes: 1
From: Missouri
Year: 1996
Model: Cherokee
Engine: 4.0HO
am I missing something?
either way, mine rides just fine on 3" lift w/o DBs...
CF Veteran
Joined: Sep 2010
Posts: 2,844
Likes: 0
From: Warsaw, IN
Year: 2000,1990,1999
Model: Cherokee
Engine: 4.0
Couldnt agree more...I bought the 3" RC kit with AAL the first time for just under $400...since then I've added 2.5" of lift and spent well over 500 bucks in accessories that I should have gotten in a kit the first go round! Adj upper & lower control arms, adj trac bar, tc drop, drop pitman arm, u-bolts, and the list goes onnnnn...
Sent from my iPad using CherokeeFM
Sent from my iPad using CherokeeFM
Dear lord, I gave like $250 for my rc 3" shipped!
No, the OP said he was looking at two of the 4.5" kits. Someone else later was talking about their 3" kit. But yeah, 3" should ride fine on stock mounts.
CF Veteran
Joined: Jan 2011
Posts: 2,251
Likes: 1
From: Missouri
Year: 1996
Model: Cherokee
Engine: 4.0HO


