lift kit: need some help
#34
CF Veteran
Join Date: Dec 2010
Location: Frankfort IL
Posts: 1,385
Likes: 0
Received 1 Like
on
1 Post
Year: 2000
Model: Cherokee
Engine: 4.0
You use nuts and bolts for the shocks. Easily accessable and no more broken shock bolts.
#35
CF Veteran
Thread Starter
Join Date: Feb 2012
Location: Kansas
Posts: 2,652
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1994
Model: Cherokee
Engine: 190-hp, 4.0-liter I-6
Originally Posted by helmut
For those I actually pulled the carpet in the hatch area and cut into the floor. I took good measurements and cut squares right above the shock bolts. I cut them 3 sided only so they "open" and close. So after replacing the shocks you could "close the flap and put the carpet over it and you would never know there is a hole in the floor.
You use nuts and bolts for the shocks. Easily accessable and no more broken shock bolts.
#38
CF Veteran
Thread Starter
Join Date: Feb 2012
Location: Kansas
Posts: 2,652
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1994
Model: Cherokee
Engine: 190-hp, 4.0-liter I-6
Originally Posted by helmut
2-3 hrs maybe. All I did is remove the plastic thats on the floor in the rear of the hatch and the side plastics. Then you fold the carpet over, you dont have to remove it.
Thread
Thread Starter
Forum
Replies
Last Post
Sandyman
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
09-10-2015 09:21 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)