Lift - Didn’t Measure Before
#1
Seasoned Member
Thread Starter
Lift - Didn’t Measure Before
Added new “OEM” leaf springs to my 91’.
It definitely raised the rear of the XJ. But how much is unknown because I didn’t measure that before.
So now I am going to install a rear shackle relocation kit. That will add 1” to 1.5” inches. I want to go to 2”-3”.
All this matters because so many shocks are sold by a lift range. The Fox IFPs I am looking at have a range of 2” to 3.5”.
Where can I find the stock height on an XJ with a Dana 35? And what should I expect as the new leaf springs settle down? How do I figure that into the 2”-3.5” equation?
It definitely raised the rear of the XJ. But how much is unknown because I didn’t measure that before.
So now I am going to install a rear shackle relocation kit. That will add 1” to 1.5” inches. I want to go to 2”-3”.
All this matters because so many shocks are sold by a lift range. The Fox IFPs I am looking at have a range of 2” to 3.5”.
Where can I find the stock height on an XJ with a Dana 35? And what should I expect as the new leaf springs settle down? How do I figure that into the 2”-3.5” equation?
#2
Newbie
Join Date: Nov 2018
Location: Nevada
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
Year: 96 and 2001
Model: Cherokee (XJ)
Engine: 4.0
Added new “OEM” leaf springs to my 91’.
It definitely raised the rear of the XJ. But how much is unknown because I didn’t measure that before.
So now I am going to install a rear shackle relocation kit. That will add 1” to 1.5” inches. I want to go to 2”-3”.
All this matters because so many shocks are sold by a lift range. The Fox IFPs I am looking at have a range of 2” to 3.5”.
Where can I find the stock height on an XJ with a Dana 35? And what should I expect as the new leaf springs settle down? How do I figure that into the 2”-3.5” equation?
It definitely raised the rear of the XJ. But how much is unknown because I didn’t measure that before.
So now I am going to install a rear shackle relocation kit. That will add 1” to 1.5” inches. I want to go to 2”-3”.
All this matters because so many shocks are sold by a lift range. The Fox IFPs I am looking at have a range of 2” to 3.5”.
Where can I find the stock height on an XJ with a Dana 35? And what should I expect as the new leaf springs settle down? How do I figure that into the 2”-3.5” equation?
#4
Seasoned Member
Thread Starter
Thank You! That is awesome. Now i guess my only question is how to figure leaf spring settling into the equation.
#5
Member
I'll hunt some more but there is a thread somewhere that shows how to measure from axle to body to see what the lift is.
If I'm able to find it I'll link it here.
Here it is: https://www.naxja.org/forum/showthread.php?t=912893
I hope cross posting is ok, if not please let me know and I will edit.
If I'm able to find it I'll link it here.
Here it is: https://www.naxja.org/forum/showthread.php?t=912893
I hope cross posting is ok, if not please let me know and I will edit.
Last edited by Scott91370; 12-11-2018 at 12:06 PM.
Thread
Thread Starter
Forum
Replies
Last Post
518Cherokee
Modified XJ Cherokee Tech
26
02-22-2017 02:50 PM
jjosh1795
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
3
06-16-2011 09:25 AM
CHERO-NEWBIE
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
4
07-28-2009 01:32 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)