Modified XJ Cherokee Tech XJ (84-01)
All modified tech questions. If it modifies your XJ beyond stock parts ask it here.
Sponsored by:
Sponsored by:

lift advise?

Thread Tools
 
Search this Thread
 
Old Apr 24, 2011 | 10:16 PM
  #1  
Bluemax's Avatar
Thread Starter
Senior Member
 
Joined: Aug 2009
Posts: 724
Likes: 1
From: B-town sc
Year: 1989
Model: Cherokee
Engine: 4.0
Default ADVISE!!!!!

Ok, so i been reading on different lift kits and i am pretty much settled on the zone 3". but im a bit reluctant after reading a few thread's from people with other 3" kits that only get 2- 2.5" of lift. i would like to know just how high this zone kit will net me, cause i dont wanna chunk out the cash on a 3" if all im gona get is 2.5"!

Last edited by Bluemax; Apr 24, 2011 at 10:35 PM.
Reply
Old Apr 24, 2011 | 10:43 PM
  #2  
Gatchmo5710's Avatar
CF Veteran
 
Joined: Apr 2010
Posts: 2,209
Likes: 3
From: st.george utah
Year: 1996
Model: Cherokee
Engine: l6 4.0
Default

Originally Posted by Bluemax
Ok, so i been reading on different lift kits and i am pretty much settled on the zone 3". but im a bit reluctant after reading a few thread's from people with other 3" kits that only get 2- 2.5" of lift. i would like to know just how high this zone kit will net me, cause i dont wanna chunk out the cash on a 3" if all im gona get is 2.5"!
It will give you 3 inches. unless your putting a aal on. then it varies depending on your leaf pack now.
Reply
Old Apr 24, 2011 | 10:52 PM
  #3  
tacoleman93's Avatar
Junior Member
 
Joined: Oct 2010
Posts: 39
Likes: 2
From: South
Year: 1999
Model: Cherokee
Engine: 4.0
Default

i purchased the 3"zone AAl kit in July 2010 to run 31" tires. Immediatley upon installation i measured a differece of 3.25" in rear and every bit of 3 in front, i have not checked recentley as to whether this is holding up to that heigth, but i regularly haul mulitple weight trailers and have had no issues with substatial sagging in the rear. (my xj is a 99) an older model with sagging springs could produce smaller results in rear, and potentially larger results in front if 3" longer than OEM coils are replacing worn ones. p.s no transfer case drop or SYE was needed, which is what i desired. The ride is not a great deal stiffer than the stock setup. good luck
Reply
Old Apr 24, 2011 | 11:16 PM
  #4  
1996XJSport's Avatar
CF Veteran
 
Joined: Sep 2010
Posts: 1,992
Likes: 0
From: West Bloomfield,MI
Year: 1996
Model: Cherokee
Engine: 4.0L, CAI, Edelbrock Breather, Optima Yellowtop
Default

I have the Zone 3 inch lift on my 96. I installed it in October 2010 and it's been holding up great! My leafs were a little saggy before the AAL. Now, its still at the same height I measured back when I installed it. No more sagging! I got a little more than 3 inches front and rear. The quality of the parts are great, I would suggest getting the nitro shock upgrade though because I'm running the hydroulic shocks and they're a little soft.
Reply
Old Apr 24, 2011 | 11:23 PM
  #5  
Bluemax's Avatar
Thread Starter
Senior Member
 
Joined: Aug 2009
Posts: 724
Likes: 1
From: B-town sc
Year: 1989
Model: Cherokee
Engine: 4.0
Default

alright this makes me feel better about it! i got a 91 with 267k on it, it was owned by a older lady the rear springs don't sag hardly at all. got worried aqfter reading about guys with the rough country 3" lift get only around 2"!
Reply
Old Apr 24, 2011 | 11:33 PM
  #6  
lolz_jeep's Avatar
Senior Member
 
Joined: Apr 2011
Posts: 563
Likes: 0
From: Lima Ohio
Year: 1996
Model: Cherokee
Engine: 4.0 HO
Default

you should look at at rustys 4.5" long arm kit its much more worth your time and money IMHO
Reply
Old Apr 24, 2011 | 11:36 PM
  #7  
1996XJSport's Avatar
CF Veteran
 
Joined: Sep 2010
Posts: 1,992
Likes: 0
From: West Bloomfield,MI
Year: 1996
Model: Cherokee
Engine: 4.0L, CAI, Edelbrock Breather, Optima Yellowtop
Default

Originally Posted by Bluemax
alright this makes me feel better about it! i got a 91 with 267k on it, it was owned by a older lady the rear springs don't sag hardly at all. got worried aqfter reading about guys with the rough country 3" lift get only around 2"!
Yeah my 96 was owned by the city of St. Louis, MO and was kind of abused from the looks of it. It had a cargo mat in the rear and the trailer hitch had a little rust on it. I'm guessing it towed and hauled heavy things quite a bit which made my leafs sag an inch or so. Sad thing is, my XJ had 66k when I bought her hahaha
Reply
Old Apr 24, 2011 | 11:47 PM
  #8  
Bluemax's Avatar
Thread Starter
Senior Member
 
Joined: Aug 2009
Posts: 724
Likes: 1
From: B-town sc
Year: 1989
Model: Cherokee
Engine: 4.0
Default

Originally Posted by lolz_jeep
you should look at at rustys 4.5" long arm kit its much more worth your time and money IMHO
gladly, would you like to donate the money to buy it?
Reply
Old Apr 25, 2011 | 12:44 PM
  #9  
91deathmachine's Avatar
Newbie
 
Joined: Feb 2011
Posts: 23
Likes: 0
From: Chino Hills
Year: 1991
Model: Cherokee
Engine: 4.0
Default

just save up a few more benjis and get the 4.5
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
BruceB
Modified XJ Cherokee Tech
23
Mar 13, 2021 06:07 PM
ohiohunteRN
Great Lakes
0
Sep 8, 2015 10:20 AM
Carlisle
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
Sep 6, 2015 08:21 AM
Sandyman
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
5
Sep 5, 2015 07:56 PM
2000JGC
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
1
Sep 3, 2015 09:53 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 01:13 AM.