hurculinedxj

So I bought a XJ recently and noticed that the rear pinion is angled toward the Tcase, instead of level. When you let the clutch out the axle rotates up and almost binds the ujoint. So I'm looking for a solution. I dont want to spend alot right now so I can pick up some good tires and at least drive the Jeep. Im temped to buy a 3in, full length AAL but worried it wont fix my issue. I think just repossioning the axle would help a little bit. It has 3in blocks on it, which are coming out, and Im sure they are contributing to the twisting. You guys think that removing the blocks and adding a leaf with lift shackles would solve my problem? Just want to get some reinforcement before I pull the trigger on some new parts. Thanks

jebmccall

i know you said you dont want to spen d alot right now, but check out serious offroad products.com i picked up my RE 3.5 packs for 230 i believe. they are well worth it in the long run.

hurculinedxj

Thanks, I checked the site out. Looks like Im going to order some leaf packs, may have to wait on the tires though.

jebmccall

it will be worth it.