TitletownXJ

I recently installed my lift and this doesn't look right to me the left LCA being cocked to one side. any help would be great. And also how to fix it.

This is the right/passenger side


This is the left/driver side (this is the side in question)

SeriousOffroad

Need more info.
What doesn't look right to you?

TitletownXJ

The fact that the left LCA is cocked to one side and not in-line like the right side.

Gorillaxj

do you have an adjsutable track bar? looks like the whole axle could be off center to the drivers side. has it been adjusted? what size lift? are the tires centered o the body? (doesn't look big enough to need an adj track bar...) need more info. what lift, how big? what else was changed? does it pull? has it been aligned?

SeriousOffroad

Adjust your track bar to center your axle.

rtralabama

x2

i had that problem when i lefted mine 4". i ordered a rock krawler adj track bar to correct the problem.

TitletownXJ

its a 3" AAL w/ a 2" lift block in the rear and a 1 1/2 front puck. I measured from the frame rail to the same stop on each tire and its off by 1/2". And no I do not have a adjustable track bar.

mikeoc1

Disconnect your current track bar from the axle and see if it centers or straightens out. If it does its definitely track bar. with my 3" lift I needed one. There are other options like track bar relocation bracket, but adjustable track bar is best fix.

Gorillaxj

I would agree, the bracket can work and will get it back in the ball park. but an adjustable bar will be a first shot perfect match, and reusable if you change the setup later...

SeriousOffroad

Disconnecting the trackbar won't tell you anything.

Gatchmo5710

Go to this guys website above me. ^ and order an adjustable trac bar. He will have you Rollin in less than a week.