Ok I get this feeling/sound in the left front that makes me think my wheel is going to coming off some times, not sure what it is. It's got a 4.5 in lift and I've got all new tie rod ends, Upper/Lower Ball joints, Hub/bearings and axle u-joints. I'm all out of ideas???


Oh yeah track bar is tight and frame mount is tight.

Any ideas???

My trac bar makes a horrible noise because the heim joint is shot.

What shocks are you running?

Is the steering loose? Is that what your feeling?

Im in the same boat...but mine just makes a loud "pop" at slow speeds. I was told Bar Pin Eliminators might would fix it but i have not got around to ordering any.

RS9000 I feel it in the left front of the floorboard what would be loose that would casue that. It's really only at low speeds.

UCA bushing?

Nope changed the uc and lc bushings on both sides 2 weeks ago

I had the exact same symptoms. Finally one day when backing into the garage I noticed I could recreate the noise/thump by turning the shell at a certain point. Had my dad turn the wheel while I looked underneath and noticed my track bar was moving 1/4 to 3/8 of an inch at the frame joint. I had previously checked it several times and thought it was ok. New track bar and mount fixed it.