jeep 4.0 head swap
#1
Member
Thread Starter
Join Date: Jul 2017
Location: Aurora CO
Posts: 115
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0
jeep 4.0 head swap
so I have a 96 cherokee with, what I assume, is the 0630 head casting...I have a motor from a 93 with the 7120 head and I plan on porting the 7120 and swapping LS1 valves...but only if the 7120 head will work in place of the 0630 head. I know that the 0630 had dowel holes drilled but other than that will the 7120 bolt on the block without any problems? also this motor will be forced induction if that changes any answers
Last edited by greynolds17; 11-15-2018 at 06:44 PM.
Thread
Thread Starter
Forum
Replies
Last Post
NitroGoat
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
9
07-05-2021 02:17 PM
Green_And_Red
Modified XJ Cherokee Tech
5
01-01-2017 09:27 AM
98Redbird
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
12
12-14-2015 08:58 PM
Straight-6
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
11-25-2015 05:45 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)