jcr tcase install 17/32 bit?
Thread Starter
CF Veteran
Joined: Oct 2012
Posts: 1,277
Likes: 0
From: Orlando/Winter Garden
Year: 1998
Model: Cherokee
Engine: I6
jcr tcase install 17/32 bit?
is there such thing or did they do a typo with instructions? says i gotta fit a 9/16 bolt in a 17/32 hole? Idk. seems off
Thread Starter
CF Veteran
Joined: Oct 2012
Posts: 1,277
Likes: 0
From: Orlando/Winter Garden
Year: 1998
Model: Cherokee
Engine: I6
Jeep
6. With a 17/32 bit drill the six pilot holes on the side of the frame rails. Be careful
to drill these holes round and not oval. Also be sure the bit doesn't tear the metal
as it completely goes through the hole
~~~~8. Push the assembled tool and Rivet Nut into the 7/32 hole in the frame~~~~.
6. With a 17/32 bit drill the six pilot holes on the side of the frame rails. Be careful
to drill these holes round and not oval. Also be sure the bit doesn't tear the metal
as it completely goes through the hole
~~~~8. Push the assembled tool and Rivet Nut into the 7/32 hole in the frame~~~~.
Last edited by 1998xjspt; Nov 28, 2013 at 02:22 PM.
Former Sponsor
Joined: Mar 2013
Posts: 221
Likes: 0
From: Short Pump Va.
Year: 1996
Model: Cherokee
Engine: 4.0 HO
I've installed these before...
You'll either need a 17/32" Bit like it says or a 1/2" bit and a die grinder to clearance the hole.
Edit
Link to the bit -
You'll either need a 17/32" Bit like it says or a 1/2" bit and a die grinder to clearance the hole.
Edit
Link to the bit -
Last edited by VIRGINIA FABRICATION; Nov 28, 2013 at 02:41 PM.
Thread
Thread Starter
Forum
Replies
Last Post
MidwestNick
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
10
Feb 28, 2016 02:05 AM
shelby5041
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
39
Nov 7, 2015 01:22 AM
Dannymac1216
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
13
Sep 8, 2015 06:28 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)