Ideas for Evap relocation with clayton coil conversion.
03-03-2014, 06:36 AM
#1
CF Veteran
Thread Starter
Join Date: Aug 2011
Location: Lehigh Valley, Pennsylvania
Posts: 1,090
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0 stroked to 4.6, Thanks to Teasdale'sMachine!
Ideas for Evap relocation with clayton coil conversion.
Has anybody who's installed Clayton's rear four link kit, has seen one, or has any ideas, of where to relocate the evap can on a 98+?
Anywhere behind the rear crossmember, comes in contact with the links, and above the skid floods with water/mud/snow. Perhaps there's a smaller evap canister I could swap in?
Anywhere behind the rear crossmember, comes in contact with the links, and above the skid floods with water/mud/snow. Perhaps there's a smaller evap canister I could swap in?
Thread
Thread Starter
Forum
Replies
Last Post
jmarzo
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
16
10-18-2022 04:11 PM
Tcq192
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
7
10-23-2015 09:25 AM
neocracka
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
8
09-05-2015 06:50 PM
Jicki Rough
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
09-02-2015 09:36 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)