Thinking rubicon express 5.5" lift, w/o cad brackets...

 

Yes sir. I will get good pics tomorrow with my DSLR.

 

Yea it looks like a 6.5" lift to me from the ratio of lift to tire size. Maybe 4.5" kit with shackle/coil spacers

 

As promised. Here are some pics I took this morning with my phone. If these won't work I will use my good camera tonight when I get home.

 

Im guessing RC..but I cant really see your control arms. Take a pic of your lowers, specifically the axle mounts and post back.

 

Thanks a ton guys!!!

 

I edited my post^^ Snap a pic of your LCA's and post em, the coils are either RC or RE...The control arms will be the deciding factor...obviously you have RC shocks and their stabilizer, the shackle looks like the RC shackle, cant tell on the leafs, the control arms look like RE arms though...wont know till we see a better pic.

 

Looking closer it looks like your trac bar is the RE heim joint, exactly like the one I have, but in one picture it looks black and the other it looks silver. Hard to tell.

 

just about every 3/4" heim looks the same.

i spy an older rough country trackbar drop bracket on the axle end as well.

are those rough country shocks too?

control arms appear to be rubicon express (hourglass bushing sleeve)

oh, and lift blocks AND an extended shackle.

Looks like a bastardized lift to me, never seen a shackle like that either.

 

Good eyes, I didnt notice the blocks..they look big.

 

let's see need to loose the blocks and and some s10 leafs to the rear, then some shackle relocation boxes

 

In red, is that dangerous? I just want to make sure that I get this safe enough for my wife and daughter to ride with me.

 

yeah the blocks caught my attention immediately, need to get rid of those

 

So by adding the S10 leaf springs(which have been reading a ton on) and shackle relocation, I should be able to keep the same lift in the rear?

 

As promised, here are pics of the controls arms.

LCA:


UCA: