ryandix0n

I just got a 99 Cherokee classic with a 3.5 inch skyjacker lift. I've had people ask me if I have the long arm kit but I'm not sure how to tell. Also I want to lift it a bit higher but I'm not sure if putting coil spacers and blocks will cause me to need a slip yoke eliminator and such. Suggestions?

SeriousOffroad

To go higher (properly) you'll need all the usual suspects.
Coils or spacers, leafs/shackles, shocks, brake lines, adj. trackbar,.

Bryan98XJ

with a long arm you can tell the difference. the arms run from the axle to back by the transfer case. They say anything over 3.5" usually you need a SYE.
and please dont do blocks in the rear. you will destroy your leaf springs. Do a shackle or bastard pack if you want more lift.

ryandix0n

Ok thanks guys. I'm probably gonna stick with the 3.5 for now but in the future I'm hopin to get her up higher

peep

3.5 with basic budget, you can spend enough on just that. Higher takes on a much bigger plan. However being a jeep, you can just drive around the block stock and your bound to come up with a plan for extra parts.