Hid upgrade question
Thread Starter
CF Veteran
Joined: Dec 2011
Posts: 1,467
Likes: 0
From: Wilmington, nc
Year: 1998
Model: Cherokee
Engine: Inline 6
Originally Posted by lowrange2
Huh?
How are you going to run 55w halogen bulbs and hids?
That makes no sense.
How are you going to run 55w halogen bulbs and hids?
That makes no sense.
All Xenon HID bulbs require a ballast and ignitor (ignitor is 99% of the time built into the ballast). So yes, you need a ballast.
Please don't just toss them in the halogen housing though, you're going to blind the hell out of other drivers. To do HID's properly it takes a lot of money. I went about $1,100 into HID's and proper housings for my GTI. You'll get better light output since it will be concentrated and you won't make it impossible for other drivers to see.
Please don't just toss them in the halogen housing though, you're going to blind the hell out of other drivers. To do HID's properly it takes a lot of money. I went about $1,100 into HID's and proper housings for my GTI. You'll get better light output since it will be concentrated and you won't make it impossible for other drivers to see.
Seasoned Member
Joined: Dec 2008
Posts: 316
Likes: 0
From: 10 mi NE of Albany NY
Year: 1999
Model: Cherokee
Engine: 4.0
I did was added some e-code headlights, Cibie, but you can spend less and get almost as good, Hella/IPF Autopal, then added a heavy duty harness which relieves the voltage off the headlight switch and provides full voltage from battery
Putco 230004HW Premium Automotive Lighting Wiring H4 100W Heavy Duty Harness and Relay : Amazon.com : Automotive
The harness alone will increase light output
Here is my set up with 55/60 Osram bulbs Light output will increase when I put in new bulbs.

and with stock harness and same bulbs one stock sealed beam/one Cibie

I have less than $150 in my set up
Do it right and do it once.
The harness alone will increase light output
Here is my set up with 55/60 Osram bulbs Light output will increase when I put in new bulbs.

and with stock harness and same bulbs one stock sealed beam/one Cibie

I have less than $150 in my set up
Do it right and do it once.
Last edited by raypla; Nov 1, 2012 at 07:45 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)




