Heres some Fuel Tank Hanger bolts I TRyed making
#1
Newbie
Thread Starter
Join Date: Dec 2017
Location: Canada
Posts: 19
Likes: 0
Received 1 Like
on
1 Post
Year: 1996
Model: Cherokee(SJ)
Engine: 4.0
Heres some Fuel Tank Hanger bolts I TRyed making
Well Dropped the leaking gas Tank on my Jeep XJ
I did NOT feel like using a grinder on the Tank Hanger bolts cause of the gas leak
so i simply broke em off with a snipe.and bigger ratchet wrench deep socket 9/16..
So this is what i came up with i think it Should work good....
being located in Canada i would have to wait sometime for these after ordered in ,,,
So i just Bought some 3/8 10 inch Carriage bolts cost 1.99 each
heated with propane torch and bent them in my vise to a 90 at the end
seems to fit in well in the JEEP tank Hanger slots
but yeah they are a lil long but once installed will chop em down alil..
I did NOT feel like using a grinder on the Tank Hanger bolts cause of the gas leak
so i simply broke em off with a snipe.and bigger ratchet wrench deep socket 9/16..
So this is what i came up with i think it Should work good....
being located in Canada i would have to wait sometime for these after ordered in ,,,
So i just Bought some 3/8 10 inch Carriage bolts cost 1.99 each
heated with propane torch and bent them in my vise to a 90 at the end
seems to fit in well in the JEEP tank Hanger slots
but yeah they are a lil long but once installed will chop em down alil..
Last edited by JeepViking; 12-02-2017 at 07:54 PM.