HELP, RHD to LHD steering
#1
Newbie
Thread Starter
Join Date: Feb 2021
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee (XJ)
HELP, RHD to LHD steering
Put a used front housing assembly from junk yard under jeep. Did not realize it was from a postal jeep which was Right hand drive, now steering, track bar etc. Wont hook up, does anyone make a conversion??
#2
CF Veteran
if you want to hook up the drag link and tie rod, flip it over and drill out the steering arms so you can put some tapered sleeves in. It is actually the best way to do OTK conversions. I don't think you will be able to use the track bar. Make sure you check the parallelism of the track bar and drag link. You may need to make some adjustments there
#4
CF Veteran
Join Date: Jun 2016
Location: Santa Clarita California
Posts: 2,138
Likes: 0
Received 277 Likes
on
243 Posts
Year: 2001
Model: Cherokee (XJ)
Engine: 4.0L
You will have to one of two things , to make that front end work you will have to cut and weld the new brackets on , and two get the wright front end .
Thread
Thread Starter
Forum
Replies
Last Post
mcd58
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
06-21-2013 07:35 AM
Metlic53
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
3
07-15-2010 06:45 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)