Modified XJ Cherokee Tech XJ (84-01)
All modified tech questions. If it modifies your XJ beyond stock parts ask it here.
Sponsored by:
Sponsored by:

Heavy vibration around 25mph

Old May 9, 2013 | 12:49 PM
  #1  
'94 XJ's Avatar
Thread Starter
Junior Member
 
Joined: Nov 2012
Posts: 32
Likes: 0
From: Colorado Springs, Colorado
Year: 1994
Model: Cherokee
Engine: 4.0L inline 6
Default Heavy vibration around 25mph

I know this has probably been asked but I couldn't find anything useful. So recently I noticed that when I hit about 25 mph or the end of second gear that the car starts to shake violently and you can feel it like bad. I don't know if it could be wheel balancing or a driveshaft/ujoint problems. This is my dd so I need to get this fixed ASAP. Anyone have any ideas on what it could be
Reply
Old May 9, 2013 | 03:46 PM
  #2  
DirtRoadXJ's Avatar
Senior Member
 
Joined: Nov 2011
Posts: 656
Likes: 0
From: Manteca, CA
Year: 1998
Model: Cherokee
Engine: 4.0
Default

Need more information.

Lift?
Tires and wheels?
Front or rear vibration?
SYE?
Trackbar?
Reply
Old May 9, 2013 | 04:45 PM
  #3  
'94 XJ's Avatar
Thread Starter
Junior Member
 
Joined: Nov 2012
Posts: 32
Likes: 0
From: Colorado Springs, Colorado
Year: 1994
Model: Cherokee
Engine: 4.0L inline 6
Default

3 in lift
31" tires
Sye: yes
The whole damn thing shakes right when I hit the gas in third.. Haha
Reply
Old May 9, 2013 | 04:59 PM
  #4  
'94 XJ's Avatar
Thread Starter
Junior Member
 
Joined: Nov 2012
Posts: 32
Likes: 0
From: Colorado Springs, Colorado
Year: 1994
Model: Cherokee
Engine: 4.0L inline 6
Default

Sounds like its coming more from the rear though
Reply
Old May 9, 2013 | 11:55 PM
  #5  
DirtRoadXJ's Avatar
Senior Member
 
Joined: Nov 2011
Posts: 656
Likes: 0
From: Manteca, CA
Year: 1998
Model: Cherokee
Engine: 4.0
Default

check u-joints.
Reply
Old May 10, 2013 | 11:55 AM
  #6  
RubberSideUp's Avatar
Senior Member
 
Joined: Mar 2011
Posts: 600
Likes: 0
Model: Cherokee
Default

Check the rear pinion angle.
Reply
Old May 10, 2013 | 11:58 AM
  #7  
Lowrange2's Avatar
Junior Member
 
Joined: May 2008
Posts: 15,016
Likes: 11
From: +34° 25' 35.67", -81° 21' 12.04"
Year: 1993
Engine: 4.0
Default

Does it start vibrating and not stop until you go below 25 or does it smooth out once you get to going faster?
Reply
Old May 10, 2013 | 12:42 PM
  #8  
'94 XJ's Avatar
Thread Starter
Junior Member
 
Joined: Nov 2012
Posts: 32
Likes: 0
From: Colorado Springs, Colorado
Year: 1994
Model: Cherokee
Engine: 4.0L inline 6
Default

Checked the front and rear ds. The front one moves. And it won't go away until I get below 25
Reply
Old May 10, 2013 | 02:04 PM
  #9  
'94 XJ's Avatar
Thread Starter
Junior Member
 
Joined: Nov 2012
Posts: 32
Likes: 0
From: Colorado Springs, Colorado
Year: 1994
Model: Cherokee
Engine: 4.0L inline 6
Default

So I took out the front driveshaft and it still is vibrating the same which makes be believe its the rear u joints
Reply
Old May 10, 2013 | 02:06 PM
  #10  
DougyFresh's Avatar
Senior Member
 
Joined: Nov 2010
Posts: 711
Likes: 1
From: Benton, KY
Year: 1991
Model: Cherokee
Engine: 4.0
Default

rear u-joints, pinion angle, bad tire, bad rearend... can't really narrow it down to just the u-joints.

u-joints are the cheapest part if that's the problem though...
Reply
Old May 10, 2013 | 02:09 PM
  #11  
'94 XJ's Avatar
Thread Starter
Junior Member
 
Joined: Nov 2012
Posts: 32
Likes: 0
From: Colorado Springs, Colorado
Year: 1994
Model: Cherokee
Engine: 4.0L inline 6
Default

How would you tell if your pinon angle isn't right? I know the rear end is fine and so are the tires
Reply
Old May 10, 2013 | 02:46 PM
  #12  
RubberSideUp's Avatar
Senior Member
 
Joined: Mar 2011
Posts: 600
Likes: 0
Model: Cherokee
Default

Originally Posted by '94 XJ
How would you tell if your pinon angle isn't right? I know the rear end is fine and so are the tires
Angle finder. http://www.stu-offroad.com/axle/pinion/pinion-1.htm
Reply
Old May 10, 2013 | 02:46 PM
  #13  
I ARE EL1TE's Avatar
Seasoned Member
 
Joined: Dec 2012
Posts: 353
Likes: 0
From: Taxachusetts
Year: 1998
Model: Cherokee
Engine: 4.0L H/O
Default

Originally Posted by '94 XJ
How would you tell if your pinon angle isn't right? I know the rear end is fine and so are the tires
The pinion yoke should be pointed directly at the tcase output shaft
Reply
Old May 10, 2013 | 04:08 PM
  #14  
'94 XJ's Avatar
Thread Starter
Junior Member
 
Joined: Nov 2012
Posts: 32
Likes: 0
From: Colorado Springs, Colorado
Year: 1994
Model: Cherokee
Engine: 4.0L inline 6
Default

Alright, I'll check on it later thanks man!
Reply
Old May 10, 2013 | 04:18 PM
  #15  
'94 XJ's Avatar
Thread Starter
Junior Member
 
Joined: Nov 2012
Posts: 32
Likes: 0
From: Colorado Springs, Colorado
Year: 1994
Model: Cherokee
Engine: 4.0L inline 6
Default

Could it also have anything to do with the t case chain? I need I replace it but haven't got to it yet...
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
ROCKRIDGE 4WD
Vendor Showcase
1
Dec 22, 2018 09:49 AM
ROCKRIDGE 4WD
Vendor Showcase
6
Jul 13, 2016 12:11 PM
toasterknight
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
33
May 21, 2016 07:03 AM
ROCKRIDGE 4WD
Vendor Showcase
1
Apr 7, 2016 06:06 PM
Lightning_19k
Modified XJ Cherokee Tech
14
Oct 3, 2015 09:52 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Thread Tools
Search this Thread

All times are GMT -5. The time now is 09:10 PM.