Going higher
#1
Newbie
Thread Starter
Join Date: Apr 2014
Location: 802
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
Year: 99
Model: Cherokee
Engine: 4.0L
Going higher
So im running a rc 3 inch lift on 31's and want to lift my jeep another 2 inches in the spring.
I already have shackles to lift the back to where i want it but now im wondering about the front should i try to go off my original 3 inch lift and throw spacers on there then bump-stop it or just get new springs an shocks set for the right height and then go from there?
Also what else am i going to need to get to properly lift my jeep past the 3"? I know extended break lines and im going to be getting long arms to replace the factory ones but js there anything else?
Thanks allot any help would be greatly appreciated
I already have shackles to lift the back to where i want it but now im wondering about the front should i try to go off my original 3 inch lift and throw spacers on there then bump-stop it or just get new springs an shocks set for the right height and then go from there?
Also what else am i going to need to get to properly lift my jeep past the 3"? I know extended break lines and im going to be getting long arms to replace the factory ones but js there anything else?
Thanks allot any help would be greatly appreciated
Thread
Thread Starter
Forum
Replies
Last Post
Eyesell
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
3
09-22-2015 09:21 AM
Programbo
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
6
09-20-2015 07:12 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)