Getting Ready to Lift, A Little Help Please
Thread Starter
Newbie
Joined: Sep 2011
Posts: 20
Likes: 0
From: Nebraska
Year: 1996
Model: Cherokee
Engine: 4.0
Getting Ready to Lift, A Little Help Please
Lifting my 96 in a week. Here is what I have
Zone 3" kit
Trans case drop
Sway bar links
Fat Bobs LCAs
4wd Hardware Adj Trac bar
Rustys Tie Rod
Moog upper and lower ball joints
Timken wheel bearings
New motor mounts
Tranny mount
Goodyear 31x10.5x 15s
M/T Classic II wheel
Ineed a drag link, lugs, Tie rod ends and u joints
Are there any bolts Im gonna break and should have on hand? Parts store is 30 miles away, and if its prone to breaking I want it on hand.
Also anyone have a part # for spicer axle U joints?
Thanks!
Zone 3" kit
Trans case drop
Sway bar links
Fat Bobs LCAs
4wd Hardware Adj Trac bar
Rustys Tie Rod
Moog upper and lower ball joints
Timken wheel bearings
New motor mounts
Tranny mount
Goodyear 31x10.5x 15s
M/T Classic II wheel
Ineed a drag link, lugs, Tie rod ends and u joints
Are there any bolts Im gonna break and should have on hand? Parts store is 30 miles away, and if its prone to breaking I want it on hand.
Also anyone have a part # for spicer axle U joints?
Thanks!
Senior Member
Joined: May 2011
Posts: 713
Likes: 0
From: Jackson,TN
Year: 2000
Model: Cherokee
Engine: 4.0
Rear upper shock mount bolts usually break. They are 5/16 bolts 1 1/4" long. Search around and you should find some write ups on how to fix it.
I would also pick up some longer brake lines. I pretty much stopped buying spicer u-joints since there cross shafts are mad in china now. There not much different then all the other companys now.
I would also pick up some longer brake lines. I pretty much stopped buying spicer u-joints since there cross shafts are mad in china now. There not much different then all the other companys now.
Last edited by MuscleHead; Feb 19, 2012 at 10:05 AM.
CF Veteran
Joined: Dec 2010
Posts: 1,240
Likes: 0
From: Rocket Country MI
Year: 1999
Model: Cherokee
Engine: 4.0
pb blaster is your best friend .... hit everything with it every day b4 you get into this lift, morning and at night b4 you put it away..
find some bolts for the leaf springs they always cause issues
find some bolts for the leaf springs they always cause issues
Thread Starter
Newbie
Joined: Sep 2011
Posts: 20
Likes: 0
From: Nebraska
Year: 1996
Model: Cherokee
Engine: 4.0
Rear upper shock mount bolts usually break. They are 5/16 bolts 1 1/4" long. Search around and you should find some write ups on how to fix it.
I would also pick up some longer brake lines. I pretty much stopped buying spicer u-joints since there cross shafts are mad in china now. There not much different then all the other companys now.
I would also pick up some longer brake lines. I pretty much stopped buying spicer u-joints since there cross shafts are mad in china now. There not much different then all the other companys now.
Senior Member
Joined: May 2011
Posts: 713
Likes: 0
From: Jackson,TN
Year: 2000
Model: Cherokee
Engine: 4.0
Thread
Thread Starter
Forum
Replies
Last Post
NM-XJ
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
18
Oct 23, 2018 04:21 PM
FS[GreatLakes]: Upgraded 4 Hole 87-98 Injectors
JeepStephie99
Engines/Tranny/T-Case
107
Jul 12, 2016 01:58 PM
RickJames Bish
Modified XJ Cherokee Tech
5
Sep 2, 2015 03:22 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
