getting ready for lift install. quick ?
#1
CF Veteran
Thread Starter
Join Date: Dec 2010
Location: S.Jersey
Posts: 1,700
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
getting ready for lift install. quick ?
I am getting ready to start my IRO install. Today i ordered 1-1 1/2 shackles and 3/4" isoloators.
So i'll have 3.75" of lift in the front. I was going to do the 3" packs and set the shackles at the 1inch mark. But what if i set them 1.5? 4.5" total rear lift. The diff between the f/r would be 3/4"
front 3.75" rear 4.5" all with 1" t/c drop. Is that to much of a difference front and rear or will i be good.
I think it will give it a nicer stance,instead of the back being lower than the front. what should i do.
thanks in advance.
So i'll have 3.75" of lift in the front. I was going to do the 3" packs and set the shackles at the 1inch mark. But what if i set them 1.5? 4.5" total rear lift. The diff between the f/r would be 3/4"
front 3.75" rear 4.5" all with 1" t/c drop. Is that to much of a difference front and rear or will i be good.
I think it will give it a nicer stance,instead of the back being lower than the front. what should i do.
thanks in advance.
Last edited by OEJ; 04-25-2011 at 08:49 PM.
Thread
Thread Starter
Forum
Replies
Last Post
NM-XJ
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
18
10-23-2018 04:21 PM
FS[GreatLakes]: Upgraded 4 Hole 87-98 Injectors
JeepStephie99
Engines/Tranny/T-Case
107
07-12-2016 01:58 PM
RickJames Bish
Modified XJ Cherokee Tech
5
09-02-2015 03:22 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)