So I lost a cap on my u joint on driver side driving down the road yesterday, and this makes twice in a little over a year. Im locked up front and I use spicer joints. This seems like a time to do the mod to hold these sucker together. Those that have done it , are yall using grinders or dremels or what? I have a grinder but it seems like it gonna be tough to get in there.I've got to get a new disc to make sure. Also would these work? I got them from another site that someone said would work.thanks Heath

 

Found this....http://www.jeepforum.com/forum/f140/...p/grade-416890

 

page not found error

 

I used my Dremel when I did the clips for the Alloy X-joints





Would be faster and easier to use an 8" bench grinder with cutting and grinding wheels

You don't have to remove much material

 

I need to pick up a dremel but Im not sure wich one I need.iirc there are a couple different models..well I put a dent in it with good ol hand file.lol

 

I picked up a dremel 3000 today I'm going to try and finish the axles tommorrow and pick up the napa retaining clips

 

https://www.google.com/webhp?sourcei...-joint%20clips

 

All finished upwith the drivers side.I have a passenger side leak so ill do that side when I install the new seal.