Hey guys,

Just installed the RE 3.5 lift and my sway bar links are not lining up vertically.
As if the axle on the drivers side is lower than it is on the drivers side.
Passenger sway bar link goes in but the drivers side link is too short.

I haven't installed the adjustable track bar yet but i thought that didn't affect the axle vertically.

Something with the coils maybe? Not sure...

Do I need adjustable sway bar end links?

Any ideas?

Thanks

 

Does the driver side appear to be higher than the passenger side, as viewed from the front?

 

track bar does effect the links , also everything else should be done w/ jeep on the tires on the ground before trying to attach sway bar links. give that a try.

 

Longer links needed.

 

 

Yes driver side is higher.
The passenger side sway bar link fits and the driver side is short by about an inch...

I installed the track bar so everything is done..just gotta figure out the sway bar.

 

did the kit come with the sway bar drop bracket?

 

no nothing like that...just extended sway bar links
I'm beginning to just install an adjustable link on the driver side (higher side) and call it a day

 

I just want to thank everyone for the help! Putting the upper control arms on first lined everything up perfect! Thanks!