Front drive shaft
#1
CF Veteran
Thread Starter
Join Date: Oct 2010
Location: Long Island N.Y.
Posts: 1,889
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1999
Model: Cherokee
Engine: I6 4.0
Front drive shaft
Im curious i just recently finished my bastard pack i the rear of my 99 xj and i was wondering since i netted roughly 4 inches of lift i get drive line vibes around 40mph. Can i use my front drive shaft in the rear to eliminate the drive line vibes i dont have time do get a TC drop and i have a 242 which makes it hard to find a SYE and money wise. But would the front DS in the rear be usable and get another front one from the JY
#7
CF Veteran
Join Date: Mar 2009
Location: Visalia, Kalifornia, ussa
Posts: 2,750
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1996
Model: Cherokee
Engine: 4.0
If you do a TC Drop you will need between 1/2 & 1".. I did mine using stacks of Fender washers, and just adjusted the stack till I had what I needed. Ended uo a 7/8" and a 4* shim in the axel. SYE is the best route but with the 242 you are limited to HacknTap, I believe.
Trending Topics
#8
CF Veteran
Thread Starter
Join Date: Oct 2010
Location: Long Island N.Y.
Posts: 1,889
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1999
Model: Cherokee
Engine: I6 4.0
Thanks for the replies and im not really crazy about TC drops for some reason. Would a 99 np231 from an auto bolt up to my tranny mines a 99 and is an auto also i am going to swap out the 242 any way because my chain is stretched and i can get my hands on a 231 from a 99 auto for cheap what else would i need if i have a 242 with a 35 would i need another DS?
Thread
Thread Starter
Forum
Replies
Last Post
TwinTurboXj
Cherokee Chat
11
08-23-2015 12:45 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)