Front bump stop help
Thread Starter
Junior Member
Joined: Sep 2024
Posts: 32
Likes: 2
Front bump stop help
So it appears someone prior cut off the bottom of the thing that holds the bump stop so I no longer can have bump stops. Anyone know a solution to this? Was hoping to find something online that maybe could be welded on.
::CF Moderator::
Joined: Sep 2009
Posts: 3,495
Likes: 482
From: Glen Burnie, MD
Year: 2001
Model: Cherokee (XJ)
Engine: 4.0l
CF Veteran
Joined: Jun 2009
Posts: 2,611
Likes: 447
From: Michigan
Year: 1987 MJ, 1973 J2000, 1986 XJ, 08 JK
Model: Comanche (MJ)
Engine: 4.0L H.O
Depending on where they cut it off will kinda set the tone. Can you Post a picture?
If they cut it off above the factory one then no, it's not a simple bolt in per say option. Gonna need a welder and some material to address that in my opinion.
if the cut the factory bushing off but left the cap - then yes you could buy a pair of what's shared above and re-install
If they cut it off above the factory one then no, it's not a simple bolt in per say option. Gonna need a welder and some material to address that in my opinion.
if the cut the factory bushing off but left the cap - then yes you could buy a pair of what's shared above and re-install
Thread
Thread Starter
Forum
Replies
Last Post
blarmblam
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
5
Aug 2, 2023 03:20 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)