Frame stiffeners with BDS long arm
#1
Seasoned Member
Thread Starter
Join Date: Jul 2012
Location: Orange County,Ca
Posts: 342
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: HO 4.0
Frame stiffeners with BDS long arm
Has anyone installed frame stiffeners with long arm BDS please post pictures?
#3
Seasoned Member
Thread Starter
Join Date: Jul 2012
Location: Orange County,Ca
Posts: 342
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: HO 4.0
The BDS has two brackets one that is the cross member the other wraps around the side don't think it would have been a problem If i installed first problem now all holes have been drilled and the stiffeners will drop the frame rail down 3/16. hole won't line up. Plus another issue the existing holes on the Ruffstuff do not line up with the cross member. We have already called them they say there is not a problem with their production.
#4
CF Veteran
Join Date: Feb 2010
Location: La Habra, CA
Posts: 1,152
Likes: 0
Received 1 Like
on
1 Post
Year: 1988
Engine: 4.0 RENIX
you could install the stiffeneners and then drill new holes for the crossmember and brackets. the new holes would be slightly lower than the old ones, but that shouldnt be an issue.
Thread
Thread Starter
Forum
Replies
Last Post
Karmageddon
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
12
09-15-2015 08:19 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)