Just finished a bumper project, both front and back. Now I'm looking to add lights to the front bumper. Not sure what will give me the best performance? Just looking for some advice on this with maybe some pix of ur rig and how they look. Thx

 

Hellas are pretty cheap and i find they work fine

 

hellas are real nice and never had any problems with mine

 

Hella is a great light. Top quality, you may want to watch for sales or bargains. I apply a low cost light with plastic housing. My theory is no rust and no worries when I smash em. Good light output??, I apply volume method. Whichever way you choose use good size wire to feed, 10 - 12 gauge and feed through a relay, don't run all the power through your switch. What's that bumper project look like?

 

I ran PIAA 520's on my Wrangler. They were a great light but expensive. I just put KC Apollo fogs on my XJ. Same performance but half the price.

 

I went with two 9" vision x hids on the bumper wired to the fog light switch through a relay

 

Ok so here are the bumpers 3 pix of the front and one of the back. Only 2 lights on the front bumper and I was hoping to use the wiring from the OEM fog lights because that wiring already runs to the stock switch! Thx for the advice on the lights BTW