DirtRoadXJ

i used a 3" cut off wheel.

just gotta know how to use the tool. id take that over a sawzall any day for clean cuts.

Red82

Exactly. Just gotta go slow with it and then take a file to it afterwards.

motorcharge

If you want the front cuts to be straight with boxxy angles then electric/air shears work great and they're slow enough to make nice, straight cuts.

Sawzall works fine for the rear if you use a short blade and can hold it steady enough to keep from going past the pinch welds.

If you think using an angle grinder is the worst tool for the job for cutting sheet metal you're dumb.

Kevin108

Depends on the saw. The Dewalt I have at work makes blades wobble and cuts crazy. My Milwaukee I have at home runs like a sewing machine. Short blades, a comfortable cutting position, slow and steady and things should turn out fine.

94XjSport94

I hacked mine with a grinder... That trim helps lol

Xj88

Angle grinder.

docmedpros

used an angle grinder with cut off wheel for strait cuts and dremel to do the turns as to leave less burrs

letsgomuddin

I have a mini air powered sawzaal i used worked great!

hankthetank

electric nibbler or body saw. a cut off wheel on a die grinder or angle ginder is just more time consuming thats all. a good sharp nibbler won't leave as bad of a burr on the edge afterwards, plus you can do a fairly sharp radius with it easily...not so easy with an angle grinder. my fronts took me literally 5 mins after i took off all the trim. i just followed the faded outline of the paint underneath the flares.