Jeep Cherokee Forum

Modified XJ Cherokee Tech XJ (84-01)
All modified tech questions. If it modifies your XJ beyond stock parts ask it here.
Sponsored by:
Sponsored by:

Engine running wwrmer after Winch install

Thread Tools
 
Search this Thread
 
Old May 22, 2015 | 10:08 PM
Share
  #16  
Jeep Driver's Avatar
Jeep Driver
Banned
 
Joined: Jan 2014
Posts: 1,054
Likes: 4
Model: Cherokee
Default
Originally Posted by SteveMongr
Does the Taurus fan match the CFM of mechanical fan?
The fan should Always be on when engine is running

Unless I'm at idle for more than one light cycle....my fan NEVER comes on.
Reply
0
Old May 22, 2015 | 10:09 PM
Share
  #17  
Jeep Driver's Avatar
Jeep Driver
Banned
 
Joined: Jan 2014
Posts: 1,054
Likes: 4
Model: Cherokee
Default
Originally Posted by DBMETALWORX





How about three fans?


You're fortunate.
Reply
0
Old May 22, 2015 | 11:02 PM
Share
  #18  
DBMETALWORX's Avatar
DBMETALWORX
Member
 
Joined: Jul 2012
Posts: 140
Likes: 0
From: Buckeye AZ
Year: 1989
Model: Cherokee
Engine: 4.0
Default
Originally Posted by Jeep Driver
You're fortunate.






http://dbmetalworx.com/#!/Jeep-chero...egory=13125360
Reply
0
Old May 22, 2015 | 11:13 PM
Share
  #19  
Jeep Driver's Avatar
Jeep Driver
Banned
 
Joined: Jan 2014
Posts: 1,054
Likes: 4
Model: Cherokee
Default
Originally Posted by DBMETALWORX


I understand.


My comment- You're fortunate to have the ability to do for yourself......tooling.
Reply
0
Old May 22, 2015 | 11:18 PM
Share
  #20  
Jeep Driver's Avatar
Jeep Driver
Banned
 
Joined: Jan 2014
Posts: 1,054
Likes: 4
Model: Cherokee
Default
FWIW-

An old pic and it does not show it....but.......

I have an aluminum plate sized and bolted to the rad and the fan bolted to the plate. The only way for air to flow is through the radiator.

Mine runs too cool actually.

Reply
0
Old May 22, 2015 | 11:23 PM
Share
  #21  
DBMETALWORX's Avatar
DBMETALWORX
Member
 
Joined: Jul 2012
Posts: 140
Likes: 0
From: Buckeye AZ
Year: 1989
Model: Cherokee
Engine: 4.0
Default
Originally Posted by Jeep Driver
FWIW-

An old pic and it does not show it....but.......

I have an aluminum plate sized and bolted to the rad and the fan bolted to the plate. The only way for air to flow is through the radiator.

Mine runs too cool actually.

Looks good under the hood
Reply
0
Old May 25, 2015 | 10:42 PM
Share
  #22  
phishsihp's Avatar
phishsihp
Junior Member
 
Joined: Sep 2014
Posts: 44
Likes: 0
From: Atlanta > Cali
Year: 1993
Model: Cherokee
Engine: Straight 6
Default
Originally Posted by eslack32
Here's my setup

Attachment 271589

where'd you get the bumper? I really like that one
Reply
0
Old May 26, 2015 | 09:49 AM
Share
  #23  
eslack32's Avatar
eslack32
Thread Starter
Junior Member
 
Joined: Oct 2013
Posts: 55
Likes: 0
From: S Carolina
Year: 1991
Model: Cherokee
Default
Originally Posted by phishsihp
where'd you get the bumper? I really like that one
Down and Dirty offroad. They call it the Slayer bumper.
Reply
0
Old May 26, 2015 | 09:54 AM
Share
  #24  
eslack32's Avatar
eslack32
Thread Starter
Junior Member
 
Joined: Oct 2013
Posts: 55
Likes: 0
From: S Carolina
Year: 1991
Model: Cherokee
Default
Originally Posted by HS00XJ
I haven't pulled from it yet besides spooling it off a tree and it seemed easy enough with a leather glove pushing and pulling the cable. I need to buy a fairlead for it. I don't like the look of roller fairleads but don't know how well a hawse will hold up to a metal cable.
Warn makes a Hawse fairlead for steel cable. That's what I run on both my Jeeps. They are are about $50 but worth it Imo. You can see it in post #7.
Reply
0
Old May 26, 2015 | 09:58 AM
Share
  #25  
eslack32's Avatar
eslack32
Thread Starter
Junior Member
 
Joined: Oct 2013
Posts: 55
Likes: 0
From: S Carolina
Year: 1991
Model: Cherokee
Default
Originally Posted by SteveMongr
Does the Taurus fan match the CFM of mechanical fan?
The fan should Always be on when engine is running
I dont know know the actual CFM off hand but it moves more air than any of the mechanical fan. I've even compared it to 2 other xjs
Reply
0
Old May 26, 2015 | 10:13 AM
Share
  #26  
HS00XJ's Avatar
HS00XJ
CF Veteran
10 Year Member
 
Joined: Apr 2012
Posts: 1,843
Likes: 2
From: Ross Vegas, Ga
Year: 2000
Model: Cherokee
Engine: 4.0 w/ tupy head
Default
Originally Posted by eslack32
Warn makes a Hawse fairlead for steel cable. That's what I run on both my Jeeps. They are are about $50 but worth it Imo. You can see it in post #7.
thanks ill look it up
Reply
0
Old May 26, 2015 | 04:18 PM
Share
  #27  
phishsihp's Avatar
phishsihp
Junior Member
 
Joined: Sep 2014
Posts: 44
Likes: 0
From: Atlanta > Cali
Year: 1993
Model: Cherokee
Engine: Straight 6
Default
Originally Posted by eslack32
Down and Dirty offroad. They call it the Slayer bumper.

WOW... it looks like this one is a great deal. I found the slayer bumper, but I couldn't find it with the winch and stinger bar. Check out this bumper made by them for only $229.

http://dndoffroad.3dcartstores.com/X...per_p_120.html

Is that pretty much the same bumper you have?
Reply
0
Old May 26, 2015 | 07:00 PM
Share
  #28  
jtm01xj's Avatar
jtm01xj
CF Veteran
 
Joined: Mar 2012
Posts: 1,414
Likes: 0
From: whiting
Year: 2001
Model: Cherokee
Engine: 4.0
Default Engine running wwrmer after Winch install
I made a cheap setup for les then 160$ two years ago and its been in 2 different xjs it pulls alot of air.
Attached Thumbnails Engine running wwrmer after Winch install-20140509_094954.jpg  
Reply
0
Old May 27, 2015 | 09:49 AM
Share
  #29  
eslack32's Avatar
eslack32
Thread Starter
Junior Member
 
Joined: Oct 2013
Posts: 55
Likes: 0
From: S Carolina
Year: 1991
Model: Cherokee
Default
Originally Posted by jtm01xj
I made a cheap setup for les then 160$ two years ago and its been in 2 different xjs it pulls alot of air.
Real clean looking. Details on parts or write up?
Reply
0
Old May 27, 2015 | 02:22 PM
Share
  #30  
Hi desert xj's Avatar
Hi desert xj
Junior Member
 
Joined: Sep 2014
Posts: 44
Likes: 0
From: Albuquerque NM
Year: 1999
Model: Cherokee
Engine: 4.0
Default
^^^X2^^^
Reply
0



Advanced Search

All times are GMT -5. The time now is 07:37 AM.