Hi all, we finally got around to pulling the 88 xj box and getting ready to put in the durango box. First pic is the aluminum spacer (NO CRACKS ON THE SPACER OR FRAME !) We lucked out on that one. Using new bolts we rtv'd 4 washers to the spacer. Going outside now to install.

 

Heres a write up if you get lost. Good luck.
https://www.cherokeeforum.com/f51/du...houghts-84331/

 

Hi all. Finished the steering box swap. Worked out pretty good. Thanks for all the info we got here. Next trick ? Half doors .

 

you should really consider putting in a 3/16 spacer. I broke the stock one with my hands
but then again, my JCR spacer got bent too.