My driveshaft in it right now measure from the hoop on each end 31" total I forgot to measure from center to center of u joint so what would be a longer shaft then mine

 

A 2.8L/a904/207 ds measures 42" from the center of the u-joint to the end of the slip yoke. The slip yoke itself measures 5.5" from the end of the yoke to the center of the u-joint. Looking at the pages I posted before, I wonder if you could swap your slip yoke over to the 2wd style?

 

I put in a Yj Style slip yoke already and it help a good bit I just need bout a 1-2" longer shaft

 

Do you know what it measure just the sgaft

 

36.5"

 

http://www.nagca.com/forum/showthread.php?p=143065

Someone saying a ZJ 4.0/aw4/242 ds is 34.5"

 

I may just do a hack and tap I can't find these drive shafts anywhere local all junk yards are gone I really didn't want to pay for it

 

What shape you tires in and ever balance them ?

 

My tires are about shot but yea I had then balanced today and I'm gonna get aligned Monday because most of the vibration now is just when you turn wheel slightly I have tried so many combos today trying to get it fixed I'll def buy a stock one next time start from fresh

 

Got a tape measure .....http://go.jeep-xj.info/HowtoAlignment.htm