degree shims
#1
Senior Member
Thread Starter
Join Date: Dec 2010
Location: Elgin,Il.60124
Posts: 798
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1994
Model: Cherokee
Engine: 1997 4.0 I6
degree shims
Im at roughly 4.75/5 inches of lift, just put in a sye with a rebuilt front shaft for the rear, the leaf packs i have are from the junk yard, they were brand new, i was running 3 in blocks before the packs, i gained 2-3 in over the block setup,m the spring packs from the junk yard allready had shims on them, just not sure what degree, how do i find out what i need so i can get rid of the rest of the vibes im getting???
#4
CF Veteran
Join Date: Dec 2010
Location: Frankfort IL
Posts: 1,385
Likes: 0
Received 1 Like
on
1 Post
Year: 2000
Model: Cherokee
Engine: 4.0
Im at roughly 4.75/5 inches of lift, just put in a sye with a rebuilt front shaft for the rear, the leaf packs i have are from the junk yard, they were brand new, i was running 3 in blocks before the packs, i gained 2-3 in over the block setup,m the spring packs from the junk yard allready had shims on them, just not sure what degree, how do i find out what i need so i can get rid of the rest of the vibes im getting???
Thread
Thread Starter
Forum
Replies
Last Post
shelby5041
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
8
07-20-2016 04:38 PM
mach3lude
Modified XJ Cherokee Tech
17
09-10-2015 02:34 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)