About to start on regearing the front dana 30 hp and needing a master kit. The g2 includes timken bearings just like yukons kit but doesn't have either slinger or baffle and a few other parts. My question is can anyone help me with what part numbers I need to get both oil slingers and oil baffle along with what else is included in yukons kit that the g2 doesn't but I can't identify what they are. Here is a link to the yukon kit and there are 2 round pieces toward the bottom left that I am unsure what they are and they aren't in the g2 kit linked below. Also what about the baffle and slingers?

 

Yokon looks to come with 2 axles seals and a pinion seal.

G2 only showing pinion seal.

 

avoid the G2 to install kits like the plague! I've had to replace multiple ARB lockers because the bolts were too short and they came loose.

too many people get hung up on the Timken name believing they are made in the USA, and that simply is not true. I've seen plenty marked Made in India.

I've had a lot of success with national bearing, Koyo and even SKF bearings from Napa

 

So what's the part numbers and where can I buy the oils slingers and baffles?

 

Yukon Gear & Axle Oil Slinger - Part# YSPBF-012

Yukon Gear & Axle Oil Baffle - Part# YSPBF-003

 

Thanks, but isn't there two slingers?

 

1 baffle, under the inner race
1 large slinger under the pinion
1 slinger betweeen the seal and the outer bearing