Is this a Dana 35 or c8.25?
Thread Starter
Junior Member
Joined: Oct 2012
Posts: 47
Likes: 0
From: Westminster, CO
Year: 2001
Model: Cherokee
Engine: 4.0
Seasoned Member
Joined: Jul 2009
Posts: 275
Likes: 0
From: Lakewood, CO
Year: 1993
Model: Cherokee
Engine: 4.0 HO
sorry .. couldnt resist this thread .. Im about to replace diff fluids
front is def a dana 30
heres my rear
what is recommended fluid? I have the heavy duty hitch, but dont plan on towing anything .. maybe pull vehicles stuck in snow
a decent weight for daily use ... and some random towing, maybe a 16' boat now & then .. but I do see alot of snow
synthetic or standard ? yes, I will remove plate & clean inside . what kind of spray to use?
so .. these are beefier ? body is '93 .. dont know if this axle was swapped .. where should I look for makers mark ? ..... thanks
(jeep has 3" rancho lift, 31" new AT tires .. havnt checked out the rear end real good yet, its coming, front end is keepin me busy)
front is def a dana 30
heres my rear

what is recommended fluid? I have the heavy duty hitch, but dont plan on towing anything .. maybe pull vehicles stuck in snow
a decent weight for daily use ... and some random towing, maybe a 16' boat now & then .. but I do see alot of snow
synthetic or standard ? yes, I will remove plate & clean inside . what kind of spray to use?
so .. these are beefier ? body is '93 .. dont know if this axle was swapped .. where should I look for makers mark ? ..... thanks
(jeep has 3" rancho lift, 31" new AT tires .. havnt checked out the rear end real good yet, its coming, front end is keepin me busy)
Last edited by dogkatcher; Oct 30, 2012 at 08:07 PM.
Seasoned Member
Joined: Jul 2009
Posts: 275
Likes: 0
From: Lakewood, CO
Year: 1993
Model: Cherokee
Engine: 4.0 HO
CF Veteran
Joined: May 2011
Posts: 2,135
Likes: 1
From: Santa Rosa, California
Year: 1987 Comanche,1990
Model: Cherokee
Engine: 4.0L Renix
I'd use royal purple synthetic. It might have been another person, there is another norcaljeeper on here
Last edited by NorCalJeep; Oct 30, 2012 at 09:16 PM.
Seasoned Member
Joined: Jul 2009
Posts: 275
Likes: 0
From: Lakewood, CO
Year: 1993
Model: Cherokee
Engine: 4.0 HO
Thread Starter
Junior Member
Joined: Oct 2012
Posts: 47
Likes: 0
From: Westminster, CO
Year: 2001
Model: Cherokee
Engine: 4.0
well you can take a zip tie put a bend in it, then measure 1/2 inch down from the bend and mark it, then hang the bend into the hole and fill until you get up to the line you marked (you will have to take it out and check it a lot). thats how we used fill atv diffs
CF Veteran
Joined: Jun 2012
Posts: 1,250
Likes: 3
From: California
Year: 1989
Model: Cherokee
Engine: 4.0L
While I get the humor, it's probably a poor idea to intentionally post wrong info. It's obvious to some of us but it's likely going to really screw up beginners.
Seasoned Member
Joined: Oct 2012
Posts: 277
Likes: 0
From: 3 hrs NW of Moab
Year: 1999
Model: Cherokee
Engine: Big 4.0L


