Converting to open cooling with a "T"
Thread Starter
Seasoned Member
Joined: Jun 2012
Posts: 276
Likes: 0
From: Hillsboro, OR
Year: 1988
Model: Cherokee
Engine: 4.0
I'm going to convert to an open cooling system using dorman 902-305 radiator hose "T"... Has anyone done this and what rad cap did you use?
Edit:
After reading several reviews on this product, I'm going to go with a Moroso 63730 aluminum one. I've read several reports if the plastic one failing, cracking, or collapsing prematurely.
Edit:
After reading several reviews on this product, I'm going to go with a Moroso 63730 aluminum one. I've read several reports if the plastic one failing, cracking, or collapsing prematurely.
Last edited by Whutdidyousay; Jul 17, 2012 at 11:03 AM.
Senior Member
Joined: Apr 2011
Posts: 858
Likes: 0
From: parker, co
Year: 1996
Model: Cherokee
Engine: 4.0 HO
Easy enough. Just buy the right size for the upper rad hose and splice it in. Then get an overflow jug, run the line to it. Gotta switch up your heater hoses too. Pretty easy
Thread Starter
Seasoned Member
Joined: Jun 2012
Posts: 276
Likes: 0
From: Hillsboro, OR
Year: 1988
Model: Cherokee
Engine: 4.0
Well, I had to replace and upgrade my cooling system due to a pressure bottle blow out... And I had to go with the 902-305 filler neck because of my budget.
I need to know what rad cap people used. I know it's 16lb, but I bought one and it didn't fit. It would turn on correctly, but it dosen't seat/seal properly.
Edit:
Nvm... It was a faulty cap.
I need to know what rad cap people used. I know it's 16lb, but I bought one and it didn't fit. It would turn on correctly, but it dosen't seat/seal properly.
Edit:
Nvm... It was a faulty cap.
Last edited by Whutdidyousay; Aug 17, 2012 at 01:58 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Crazynut1997
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
15
Sep 29, 2015 08:14 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)