control arm bushing help
#1
Newbie
Thread Starter
Join Date: Nov 2009
Location: GA/FL line
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: I6
control arm bushing help
I'm a newb so please bear with me. I need to replace my lower control arm bushings. I have a 4.5in BDS set up with almost 50K miles on it. I know my bushings are bad, the whole front axle moves about a quarter inch between reverse and go. I'm starting to get some pretty good drift when driving about 45mph and higher. I have upper and lower bushings NIB from BDS and want to do it this weekend. I've searched for tutorials and checked the Haynes but I'm not comfortable yet. I'm looking for some step by step info w/ pics if anyone has them, where to jack, good lessons learned etc. Push me to a thread I haven't found maybe, or youtube. I will be happy to post pics of the replacement for anyone interested. Thanks for your inputs.
#3
Senior Member
Join Date: May 2013
Location: Maryland
Posts: 681
Likes: 0
Received 28 Likes
on
23 Posts
Year: 1997
Model: Cherokee
Engine: 4.0
If it was me I would do it one arm at a time on the ground.
Not aware of any walk through, write ups etc but it should be pretty straight forward. If you have trouble getting old ones out I have known ppl to burn em out.
Dont stress about it too much get in there and knock it out.
Best of luck.
Not aware of any walk through, write ups etc but it should be pretty straight forward. If you have trouble getting old ones out I have known ppl to burn em out.
Dont stress about it too much get in there and knock it out.
Best of luck.
#4
THE Admin
Join Date: Sep 2010
Location: Lantana, Fl
Posts: 34,036
Received 231 Likes
on
187 Posts
Year: 1996
Model: Cherokee (XJ)
Engine: 4.Slow
If it was me I would do it one arm at a time on the ground.
Not aware of any walk through, write ups etc but it should be pretty straight forward. If you have trouble getting old ones out I have known ppl to burn em out.
Dont stress about it too much get in there and knock it out.
Best of luck.
Not aware of any walk through, write ups etc but it should be pretty straight forward. If you have trouble getting old ones out I have known ppl to burn em out.
Dont stress about it too much get in there and knock it out.
Best of luck.
Thread
Thread Starter
Forum
Replies
Last Post
lgrant
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
07-05-2022 12:19 AM
Busterboy
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
5
04-20-2018 05:38 PM
ROCKRIDGE 4WD
Vendor Showcase
0
09-15-2015 01:21 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)