86/4.3L_XJ

I have a 86 XJ witch i did a complete convertion on it i took the poor 2.8L V6 /tranny /and wire harness out and replace it with a 89 Chevy S10 4.3L V6
Tranny /T-Case Wiring and computer .now my question is some where along i forgot where the Vacum/Breather Hoses go the Tranny Is A 700r-4 4 speed automatic . the jeep runs grate but it wont shift all the gears I need some help here
I'm In So. Cal. LA. Area if any one can help with input that would be very Appreciated thanks in advance
you could call/ e-mail/ PM me at
akamagic69@yahoo.com
(323)485-0171

freegdr

to the tranny or from it which way

86/4.3L_XJ

From the tranny to the front not the oil ones that go to radiator they are rubber hoses that come out of the tranny and go somewhere in the front but I forgot where I was suppose to plug them thanks again

freegdr

you mean breater hose like on a axle housing correct

freegdr

read thishttp://www.s10forum.com/forum/f13/ho...tranny-175949/

86/4.3L_XJ

Thanks alot yup they are breather rubber Hoses and thay are long i just need to find a good location on my XJ to put them on that link was very helpfull thanks again

freegdr

any time id some how hook them to the firewall as high as i can get them

freegdr

shifting issue most likely has to do with the cable adjustment

86/4.3L_XJ

yeah i had to go with B&M shifter and Cable cuz likege didn't work tranny was too wide .
these are the hoses i was talking about and the 4.3 motor

86/4.3L_XJ

here are som more pics of what i did Check it out

http://s1233.photobucket.com/albums/...%20Conversion/

here are other pic's of my jeep

http://s1233.photobucket.com/albums/ff382/AKA_magic/

freegdr

this member may be able to help out with any questions you may have on the swaphttps://www.cherokeeforum.com/members/4-3l-xj-1089/

07Negative

2nd that ^^^^
I've wheeled w him to. Super sick setup. Dudes wicked smart

86/4.3L_XJ

thank again

freegdr

thats what were all here for any time ,what comes around goes around