There you go! I did the hole rear sway bar bracket thing..turn out good!

 

Is that home made or jy

 

I Used the dreaded autozone blocks for a few years now with no issues. Spring wrap is likely, but the blocks are fine, just check the u bolts from time to time, they like to work loose. I've beating up on the old xj pretty good with no issues.

 

Home cut and bent. Copy of a Chevy lower front shock mount.

 

Im going to keep that in mind thanks bud lol

 

Chevy truck 01 and up 1500 or 2500.

 

would you be able to go this route? : 3" coil spacers are cheap and work (although frowned apon), and the rear you could run either a full length 3" add-a-leaf or a rough riding short add-a-leaf and some shackles? that would get you about 3-3.5 inches out back. I myself an running a rough country 3" beginner kit with coils and add a leafs. I netted closer to 4" with the long add a leaf and 3" up front. I added a 1.5" coil spacer to the front and a half inch block plus a degree shim under the back springs. Running 31x10.50 mud claws with no rub

 

Thats what were looking at with my setup