cams
04-30-2015, 12:55 PM
#1
CF Veteran
Thread Starter
Join Date: Dec 2011
Location: Roanoke, VA
Posts: 1,050
Likes: 0
Received 2 Likes
on
1 Post
Year: 1990
Model: Cherokee
Engine: 4.0
cams
Hey guys,
I've done my fair share of wrenching on the jeep over the years, I put a 99 motor in my 90, runs great, doesn't leak or burn oil, and now...I'm hungry for more haha
So the question is, if I wanted to put a can in it, what would the gains be and what all do I need other than cam and lifters? I'm not going for a crazy change, just something with a little lope, and a little more low end umph. I've looked at the extreme 4x4 kit summit has, looks decent enough for the price, just wanna take sure I don't need to do upgraded valves or anything else...all info appreciated!!
I've done my fair share of wrenching on the jeep over the years, I put a 99 motor in my 90, runs great, doesn't leak or burn oil, and now...I'm hungry for more haha
So the question is, if I wanted to put a can in it, what would the gains be and what all do I need other than cam and lifters? I'm not going for a crazy change, just something with a little lope, and a little more low end umph. I've looked at the extreme 4x4 kit summit has, looks decent enough for the price, just wanna take sure I don't need to do upgraded valves or anything else...all info appreciated!!
Thread
Thread Starter
Forum
Replies
Last Post
JayneCobb
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
26
08-11-2020 03:22 PM
zumer715
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
10
10-03-2015 07:07 PM
JamDeeper
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
09-08-2015 08:50 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)