When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
ok.. from what im finding most places make cam upgrades according to specifications.. do they make kits that arnt set to specifications and more of say a "range" of power depending on the other upgrades you currently have setup?
It depends on what u want. With mine I wanted a smooth idle and low end torque and power. I just told them I was running a free flowing exhaust, CAI, and my motor is bored .30 over. But to answer your questions I don't know if they do. Part number from comp cams k68-232-4 is a hole kit and that cam is for great torque and smooth idle for fuel injected motors
Here are the spec on my cam. Comp cam said its a mild cam with smooth idle and u can use with stock valve springs. I know their extreme cam u have to swap value spring with the amount of lift the cam has.
I have a the Xtreme 4x4 comp with the same duration. Grind x4250h-13. Did you reuse stock pushrods? If not, what length pushrods did you use? I need an answer from anyone very soon please and thank you!
