Bushwacker fender flares
#1
Junior Member
Thread Starter
Join Date: Oct 2010
Location: Abbotsford
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0
Bushwacker fender flares
Looking for someone in the Abbotsford BC canada area that would be able to give me a hand installing these flares.
I have many years experience in automotive electronics that i could trade help with.
Any help would be much appreciated.......
I have many years experience in automotive electronics that i could trade help with.
Any help would be much appreciated.......
#3
CF Veteran
Join Date: Feb 2012
Location: Hamburg, NY
Posts: 1,258
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
^ x2, I was a bit Leary on installing them myself too. What I did was install the fronts first as they are really straight forward. Got them all installed & then when I knew I had a full day with no interruptions I did the rears. Lay everything out first and mark everything out. Layout took most of my time, cutting/hammering, sanding & painting was pretty quick. I'd also recommend getting a can of seam sealer for the rear after you cut and bend the tabs back. Clean the really good, paint them and then put the seam sealer on to stop them from rusting out bad.
Layout, layout, layout:
Good luck , it's not that bad.
Layout, layout, layout:
Good luck , it's not that bad.
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)