bumpsteer questions?
#1
bumpsteer questions?
Hello all,
im trying to pin down some minor bumpsteer Im having.
as far as I know the drag link and track bar are in line with each other, and also I have done an alignment and such. 6° of caster and 1/8 toe in, I have RE long arms on a 5.5” lift.
I’ve replaced ball joints also.
not sure where to go from here? I’m thinking it’s possible that the axle isn’t far enough forward, even though the caster is correct?
im trying to pin down some minor bumpsteer Im having.
as far as I know the drag link and track bar are in line with each other, and also I have done an alignment and such. 6° of caster and 1/8 toe in, I have RE long arms on a 5.5” lift.
I’ve replaced ball joints also.
not sure where to go from here? I’m thinking it’s possible that the axle isn’t far enough forward, even though the caster is correct?
#2
CF Veteran
I think you are getting tie rod roll and your drag link is too high on the tie rod. A common flaw in aftermarket steering
#3
Hoping someone will chime in on the effectiveness of this product https://www.ruffstuffspecialties.com/R2008.html
Thread
Thread Starter
Forum
Replies
Last Post
jeep405
Modified XJ Cherokee Tech
8
01-18-2020 10:24 AM
MajorCollateralDamage
Modified XJ Cherokee Tech
5
09-01-2015 11:00 AM
onkelz
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
06-16-2010 08:50 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)